주식회사 삼우에스앤티

Bio-Process

HOME Merck

이전상품 Millipore Express® SHC High Area Cartridge Filter 10 in. 0.5/0.2 µm Code 7 Silicone 다음 상품 Millipore Express® SHF Cartridge Filter 10 in. 0.2 µm Code 7 Silicone

리뷰 0 위시 6

Polysep® II Cartridge Filter 20 in. 0.5 µm Code 7 요약정보 및 구매

판매가격	전화문의
배송비결제	주문시 결제
제조사	Merck
원산지	USA

위시리스트

관련상품

등록된 상품이 없습니다.

상품 정보

상품 상세설명

Description
Catalogue Number	CGW672S03
Trade Name	Polysep®
Description	Polysep® II Cartridge Filter 20 in. 0.5 µm Code 7

Product Information
Format	Double Layer
Device Configuration	Cartridge
Maximum Differential Pressure, bar (psid)	3.5 bar (50 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)	3.5 bar (50 psi) @ 25 °C
Cartridge Code	Code 7 (2-226) O-ring and spear
Good Manufacturing Practices	These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Prefilter Material	Borosilicate Glass Fiber (BGF)
Quality Level	MQ400

Biological Information
Bacterial Endotoxins	Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media	Polysep™ II
Sanitization	30 min with hot water @ 80 °C
Sterilization	10 autoclave cycles or SIP @ 121 °C for 30 min

Physicochemical Information
Pore Size	1.0 / 0.5 µm
Gravimetric Extractables	The extractables level was equal to or less than 140 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food.
Non-Fiber Releasing	This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins	A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.

Dimensions
Cartridge Nominal Length	20 in. (50 cm)
Diameter	7.1 cm (2.8 in.)
Filtration Area	0.92 m²
Device Size	20 in.
Nominal Pore Size	1.0 / 0.5 µm

Materials Information
Chemistry	Mixed Cellulose Esters (MCE)
Device Material	Polypropylene
Seal Material	Silicone (SI)
Support Material	Spun bonded polypropylene

Packaging Information
Material Size	3
Material Package	Double Easy-Open bag

Specifications
Oxidizable Substances	Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥10 L

배송정보

로젠택배

배송비

- 5만원 이하 : 3500원

- 5만원 이상 : 무료

교환/반품

대표전화 : 031-755-0350

본사: (13461)경기도 성남시 분당구 운중로 129 마크시티옐로우동 10층

방문 기록

오늘 본 상품

Polysep® I

0

장바구니