주식회사 삼우에스앤티

Liquid Filtration

HOME Merck

이전상품 Opticap? Gamma Compatible XL 300 Millipore Express? SHC 0.5/0.2 ?m 3/4 in. TC/TC 다음 상품 Opticap® Autoclavable XL 10 Millipore Express® SHC 0.5/0.2 µm 9/16 in. HB/HB

리뷰 0 위시 6

Opticap® Autoclavable XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC 요약정보 및 구매

상품 선택옵션 0 개, 추가옵션 0 개

시중가격
판매가격	1,830,400원
배송비결제	주문시 결제
제조사	Merck
원산지	USA

선택된 옵션

Opticap® Autoclavable XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC

수량 +0원

위시리스트

관련상품

등록된 상품이 없습니다.

상품 정보

상품 상세설명

Description
Catalogue Number	KHGEA3TTT1
Trade Name	Millipore Express®
Description	Opticap® Autoclavable XLT 30 Millipore Express® SHC 0.5/0.2 µm 1-1/2 in. TC

Product Information
Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring seal
Housing Material	Polypropylene (PP)
Maximum Differential Pressure, bar (psid)	Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)	6.9 bar (100 psi) intermittent @ 25 °C; 5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Good Manufacturing Practices	These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
T-line/Gauge Port	T-line
Quality Level	MQ400

Biological Information
Bacterial Endotoxins	Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media	Millipore Express® SHC
Sterilization	3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Bacterial Retention	Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Wettability	Hydrophilic

Physicochemical Information
Pore Size	0.5 / 0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Air Diffusion at 23 °C	≤84.5 mL/min @ 2.8 bar (40 psig) in water
Bubble Point at 23 °C	≥4000 mbar (58 psig) air with water
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)	80 psig
Maximum Differential Pressure	80 psi (5.5 bar) continuous 100 psi (6.9 bar) intermittent
Maximum Inlet Temperature	25 °C
Non-Fiber Releasing	This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
TOC/Conductivity	After sterilization and a controlled water flush of 60 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
USP Bacterial Endotoxins	A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.

Dimensions
Cartridge Nominal Length	30 in. (75 cm)
Length	87.1 cm (34.3 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	1.47 m²
Inlet to Outlet Width	15.2 cm (6.0 in.)
Device Size	30 in.
Inlet Connection Diameter	1-1/2 in.
Outlet Connection Diameter	1-1/2 in.

Materials Information
Chemistry	Polyethersulfone (PES)
Device Material	Polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polypropylene
Vent Cap Material	Polypropylene (PP)

Packaging Information
Material Size	1
Material Package	Double Easy-Open bag

Specifications
Oxidizable Substances	Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L

배송정보

로젠택배

배송비

- 5만원 이하 : 3500원

- 5만원 이상 : 무료

교환/반품

대표전화 : 031-755-0350

본사: (13461)경기도 성남시 분당구 운중로 129 마크시티옐로우동 10층

방문 기록

오늘 본 상품

Opticap® A

1

장바구니