주식회사 삼우에스앤티

Depth & Pod Filtration

HOME Merck

이전상품 Opticap® XL5 Lifegard™ 1.0 µm 1-1/2 in. TC/TC 다음 상품 Opticap? XL10 Polygard?-CN 0.6 ?m 1-1/2 in. TC/TC

리뷰 0 위시 6

Opticap? XL10 Polygard?-CN 10.0 ?m 1-1/2 in. TC/TC 요약정보 및 구매

판매가격	전화문의
배송비결제	주문시 결제
제조사	Merck
원산지	USA

위시리스트

관련상품

등록된 상품이 없습니다.

상품 정보

상품 상세설명

Description
Catalogue Number	KN1HA10TT1
Replaces	KN1H01TC1
Trade Name	Opticap®
Description	Opticap® XL10 Polygard®-CN 10.0 µm 1-1/2 in. TC/TC

Product Information
Format	Single Layer
Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange
Housing Material	Polypropylene (PP)
Maximum Differential Pressure, bar (psid)	4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
European Pressure Equipment Directive	EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Good Manufacturing Practices	These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality Level	MQ400

Biological Information
Bacterial Endotoxins	Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media	Polygard®-CN
Sterilization	3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable

Physicochemical Information
Pore Size	10.0 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Gravimetric Extractables	The extractables level was equal to or less than 55 mg per capsule after 24 hours in water at controlled room temperature.
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)	80 psig
Maximum Inlet Temperature	25 °C
USP Bacterial Endotoxins	A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.

Dimensions
Cartridge Nominal Length	10 in. (25 cm)
Length	33.5 cm (13.2 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	0.42 m²
Inlet to Outlet Width	33.5 cm (13.2 in.)
Device Size	10 in.
Inlet Connection Diameter	1-1/2 in.
Nominal Pore Size	10.0 µm
Outlet Connection Diameter	1-1/2 in.

Materials Information
Chemistry	Polypropylene (PP)
Device Material	Polypropylene
Seal Material	Silicone (SI)
Support Material	Polypropylene
Vent Cap Material	Polypropylene (PP)

Packaging Information
Material Size	1
Material Package	Double Easy-Open bag

Specifications
Oxidizable Substances	Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

배송정보

로젠택배

배송비

- 5만원 이하 : 3500원

- 5만원 이상 : 무료

교환/반품

대표전화 : 031-755-0350

본사: (13461)경기도 성남시 분당구 운중로 129 마크시티옐로우동 10층

방문 기록

오늘 본 상품

Opticap? X

0

장바구니