주식회사 삼우에스앤티

Gas Filtration

HOME Merck

이전상품 Aervent KTGR Opticap XL10 Capsule 다음 상품 Opticap XL capsule with Aervent filter, 0.2 µm

리뷰 0 위시 6

Aervent KTGR Opticap XL5 Capsule 요약정보 및 구매

판매가격	전화문의
배송비결제	주문시 결제
제조사	Merck
원산지	USA

위시리스트

관련상품

등록된 상품이 없습니다.

상품 정보

상품 상세설명

Description
Catalogue Number	KTGRA05FF1
Trade Name	Aervent®
Description	Aervent KTGR Opticap XL5 Capsule

Product Information
Device Configuration	Capsule
Connections, Inlet/Outlet	19 mm (3/4 in.) Sanitary Flange
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring Seal
Housing Material	Polypropylene (PP)
Maximum Differential Pressure, bar (psid)	Forward: 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 4.1 bar (60 psid), intermittent
Maximum Inlet Pressure, bar (psi)	Forward - 5.5 bar (80 psi) @ 25 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C; Reverse - 4.1 bar (60 psi), Intermittent
European Pressure Equipment Directive	EMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Quality Level	MQ400

Biological Information
Media	Aervent®
Sterilization	30 autoclave cycles of 30 min @ 135 °C
Bacterial Grow-Through	Retains Brevundimonas diminuta liquid aerosol for 21 days at a minimum challenge of 10⁷ CFU/cm²
Bacterial Retention	Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Wettability	Hydrophobic

Physicochemical Information
Pore Size	0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Air Diffusion at 23 °C	≤12 mL/min @ 965 mbar (14 psig) in 70/30 % IPA/water
Bubble Point at 23 °C	≥1100 mbar (16 psig) nitrogen with 70/30 % IPA/water
Gravimetric Extractables	The extractables level was equal to or less than 28 mg per 10-inch cartridge after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
HydroCorr	≤0.38 mL/min @ 2.6 bar (38 psig) per sample
Nitrogen Diffusion at 23 °C	≤12 mL/min @ 970 mbar (14 psig) in 70/30 % IPA/water
Maximum Inlet Pressure (psig)	80 psig
Maximum Inlet Temperature	25 °C
Non-Fiber Releasing	This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Virus Aerosol Retention	Rated for aerosol retention of a total challenge of 108–1010 plaque forming units of ΦX-174 virus particles at 85 Nm3/h (50 SCFM) per cartridge.
USP Bacterial Endotoxins	Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test

Dimensions
Cartridge Nominal Length	5 in. (13 cm)
Length	21.0 cm (8.3 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	0.32 m²
Inlet to Outlet Width	21.0 cm (8.3 in.)
Device Size	5 in.
Inlet Connection Diameter	3/4 in.
Outlet Connection Diameter	3/4 in.

Materials Information
Chemistry	Polytetrafluoroethylene (PTFE)
Device Material	Polypropylene
Seal Material	Silicone (SI)
Support Material	Polypropylene
Vent Cap Material	Polypropylene (PP)

Packaging Information
Material Size	1
Material Package	Double Easy-Open bag

배송정보

로젠택배

배송비

- 5만원 이하 : 3500원

- 5만원 이상 : 무료

교환/반품

대표전화 : 031-755-0350

본사: (13461)경기도 성남시 분당구 운중로 129 마크시티옐로우동 10층

방문 기록

오늘 본 상품

Aervent KT

0

장바구니