Liquid Filtration

Sterile Millipak®-20 Filter Unit 0.22 µm 1/4 in. HB/HB w/bell 요약정보 및 구매

상품 선택옵션 0 개, 추가옵션 0 개

시중가격
판매가격 209,100원
배송비결제 주문시 결제
제조사 Merck
원산지 USA

선택된 옵션

  • Sterile Millipak®-20 Filter Unit 0.22 µm 1/4 in. HB/HB w/bell
    +0원
위시리스트

관련상품

등록된 상품이 없습니다.

상품 정보

상품 상세설명

Description
Catalogue NumberMPGL02GH2
Trade Name
  • Millipak®
DescriptionSterile Millipak®-20 Filter Unit 0.22 µm 1/4 in. HB/HB w/bell
Product Information
Device ConfigurationGamma Gold Capsule
Connections, Inlet/Outlet6 mm (1/4 in.) Hose Barb with bell
Maximum Differential Pressure, bar (psid)Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)5.2 bar (75 psi) @ 25 °C
Maximum Operating Temperature25 °C
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaDurapore®
SterilitySterile
Sterilization3 autoclave cycles of 90 min @ 123 °C; not in-line steam sterilizable
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
WettabilityHydrophilic
Physicochemical Information
Pore Size0.22 µm
Inlet ConnectionHose Barb
Outlet ConnectionHose Barb with Bell
Bubble Point at 23 °C≥3450 mbar (50 psig) air with water
Flow Rate1.5 L/min @ 1.75 bar ΔP
Gravimetric ExtractablesThe extractables level was equal to or less than 1 mg per sterilized device after a 200 mL flush and 24 hours in water at controlled room temperature.
Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Filtration Area100 cm²
Process Volume10 L
Inlet Connection Diameter1/4 in.
Outlet Connection Diameter1/4 in.
Materials Information
Chemistry
  • Polyvinylidene Fluoride (PVDF)
Device Material
  • Polycarbonate
Support MaterialPolycarbonate
Vent Cap MaterialPolyvinylidene fluoride (PVDF)
Packaging Information
Material Size2
Material PackageBlister
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL

배송정보

로젠택배


배송비 

- 5만원 이하 : 3500원

- 5만원 이상 : 무료

교환/반품

대표전화 : 031-755-0350 
본사: (13461)경기도 성남시 분당구 운중로 129 마크시티옐로우동 10층