3차수 제조장치
관련상품
₩ 481,800
BIOPAK UF CARTRIDGE (1/PK)
₩ 318,200
Millipak® Express 20 Filter (1/box)
₩ 327,400
Millipak® Express 40 Filter (1/box)
₩ 695,700
UV LAMP 185 nm - 6W
₩ 693,000
SYNERGYPAK 1
상품 정보
상품 상세설명
Water Specifications
Synergy® ultrapure water (Type 1)
| Resistivity at 25 °C | 18.2 MΩ•cm |
| TOC1 (Synergy® system) | ≤ 10 ppb |
| TOC1 (Synergy® UV system) | ≤ 5 ppb |
| Particulates (size > 0.22 µm)2 | < 1 particulate/mL |
| Bacteria (Synergy® system)2 | < 0.1 CFU/mL |
| Bacteria (Synergy® UV system) 3 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)3 | < 0.001 EU/mL |
| RNases3 | < 0.01 ng/mL |
| DNases3 | < 4 pg/µL |
| Flow Rate | > 1.5 L/min |
| 1in the appropriate test conditions 2with Millipak® final filter 3with Biopak® polisher These values (validated with Elix® feed water) are typical and may vary depending on the nature and concentration of contaminants in the feed water. | |
Feed water
| Feed water quality | Elix®, RiOs™, distilled or DI water with conductivity < 100 µS/cm and TOC < 50 ppb |
| Feed water connection | ½” Gaz M |
| Feed water pressure * | 0 - 0.3 bar |
| Feed water temperature | 5 - 35 °C |
| * For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower. | |
System Specifications
| Dimensions (H x W x D) | 540 x 290 x 380 mm (21.3 x 11.4 x 15 in) |
| Operating weight (Synergy® systems) | 9.7 kg (21.4 lb) |
| Operating weight (Synergy® UV system) | 10.2 kg (22.5 lb) |
| Operating weight (Remote dispenser) | 2.68 kg (5.91 lb) |
| Electrical power supply voltage | 100 - 250 V +/- 10 % |
| Electrical power supply frequency | 50 - 60 Hz +/- 10 % |
배송정보
로젠택배
배송비
- 5만원 이하 : 3500원
- 5만원 이상 : 무료
교환/반품
대표전화 : 031-755-0350
본사: (13461)경기도 성남시 분당구 운중로 129 마크시티옐로우동 10층
