Ultrapure, Type 1 water specifications1 (from Q-POD® dispenser) | |
Resistivity at 25 °C2 | 18.2 MΩ·cm |
Total Organic Carbon (TOC) | ≤ 5 ppb |
Particles3 | No particles with size > 0.22 µm |
Bacteria | < 0.01 cfu/mL (<10 cfu/L)(4) < 0.005 cfu/mL (< 5 cfu/L)(5) |
Pyrogens (endotoxins)6 | < 0.001 EU/mL |
RNases6 | < 1 pg/mL |
DNases6 | < 5 pg/mL |
Proteases6 | < 0.15 µg/mL |
Flow rate | Up to 2 L/min |
1. These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. 2. Resistivity can also be displayed non-temperature-compensated as required by USP. 3. With Millipak® or Millipak® Gold filter. 4. With Millipak® or Biopak® filter. 5. With Millipak® Gold filter when installed and used in a laminar flow hood. |
Feed water requirements | |
Feed water quality | Pretreated water using electrodeionization (EDI), deionization (DI), reverse osmosis (RO), or distillation technologies |
Pressure | < 6 bar |
Conductivity at 25 °C | ≤ 100 µS/cm @ 25 °C (as NaCl) |
TOC (total organic carbon) | < 50 ppb |
Temperature | 5 – 35 °C / 41 – 95 F |
System Specifications | |
Electric power source voltage | 100 – 240 VAC ± 10% |
Electric power source frequency | 50 – 60 Hz ± 2 Hz |
System-mounted configuration (Purification unit with Q-POD® dispenser & HMI touchscreen) | |
Dimensions (H x W x D) | 770 x 342 x 520 mm (30.3 x 13.4 x 20.5 in) |
Operating weight | 18.0 kg (39.7 lb) |
Wall-mounted configuration | |
Dimensions (H x W x D) | |
Purification unit | 498 x 265 x 350 mm (19.6 x 10.4 x 13.8 in) |
Q-POD® dispenser | 542 x 113 x 437 mm (21.3 x 4.4 x 17.2 in) |
HMI touchscreen | 186 x 190 x 94 mm (7.3 x 7.4 x 3.7 in) |
Operating weight | |
Purification unit | 16.7 kg (36.8 lb) |
Q-POD® dispenser | 1.2 kg (2.7 lb) |
HMI touchscreen | 0.58 kg (1.3 lb) |
로젠택배
배송비
- 5만원 이하 : 3500원
- 5만원 이상 : 무료